Accelerator; Handlebar Adjustment; Adjusting Fork; Adjusting The Idle Speed - Beta evo 125SS 2022 Owner's Manual

3

ACCELERATOR

ADJUSTING THE IDLE SPEED

A
In order to perform this operation correctly,
we advise you to do it when the engine
is hot, connecting an electric revolution
counter to the spark plug wire. Then use
a screwdriver on register screw A to cali-
brate the minimum with 900÷1000 rpm.

HANDLEBAR ADJUSTMENT

The handlebar can be adjusted by rotating
it back and forth.
- To adjust the handlebar loosen screws 1.
- Position the handlebar according to
requirements.
- Tighten to the torque indicated.
1
20Nm

ADJUSTING FORK

ADJUSTING THE REBOUND
DAMPER
The hydraulic brake unit in extension
determines the behaviour in the extension
1
phase of the fork and can be adjusted us-
ing screw 1. Turning clockwise increases
the action of the brake in extension, while
rotating counter-clockwise decreases the
action of the brake in extension.
For standard calibration, refer to page
.
11
EN
28