Legs Assembly And Parts - Beta evo 125SS 2022 Owner's Manual

4
10Nm
10Nm
40Nm
EN
1
10Nm
25Nm

LEGS ASSEMBLY AND PARTS

Apply the legs to the vehicle and tighten
the screws 1 to the torque indicated.
ATTENTION: Tightening of the screws
should be carried out by adjusting the
torque wrench to to the stability torque with
repeated tightening until stability torque has
been achieved.
Grease the wheel bolt.
Apply wheel and wheel bolt.
Apply brake caliper, disc cover and fender.
Tighten to the torque indicated.
ATTENTION: Tightening of the
screws should be carried out by
adjusting the torque wrench to to
the stability torque with repeated
tightening until stability torque has
been achieved.
Place the vehicle on the ground.
Compress and release the fork 3-4 times.
Tighten the wheel bolt and the screws of
the foot.
ATTENTION: Tightening of the
screws should be carried out by
adjusting the torque wrench to to
the stability torque with repeated
tightening until stability torque has
been achieved.
50