2
CLUTCH LEVER
Clutch lever 1 is fitted to the left-hand side
of the handlebars.
1
RH SWITCH
The off switch is positioned on the right-
hand side of the handlebar and consists
of the following:
shutdowns engine
: it is necessary to
hold it until the engine stops.
SWITCH FOR CHANGE MAPPING
The switch for change mapping is located
on the tank cover.
By acting on the switch shown in the figure,
it is possible to select one of two possible
mappings for the ignition advance.
With the switch in position
, "soft" map-
ping more suited to muddy terrain and for
a gentler response of the bike is selected.
With the switch in position
"hard"
mapping that is more suitable for dry land
and for a more aggressive response of the
bike is selected.
EN
19