Beta; Bit Clock; Bluetooth; Bnc Mux Settings - Agilent Technologies ESG Series User And Programming Manual

Softkey Reference
B

Beta

This softkey is activated automatically when the Kaiser windowing
function is selected. The default Beta factor provides a good
compromise for optimizing out of band performance (ACP) without
seriously compromising passband performance (EVM). Changing the
Beta factor adjusts the trade-off between ACP and EVM. Decreasing
the value improves EVM. Increasing the value improves ACP.
Range: 1.000 through 10.000
Default Value: 4.000
Softkey Location:
Filter
filter) >

Bit Clock

Use this softkey to select a bit clock signal for the output at the rear
panel DATA CLK OUT port. This clock rate is normally set to
812.5 kHz.
Softkey Location:

BNC MUX Settings

Bluetooth

Press this softkey to set up a predefined Bluetooth digital modulation
format to modulate a continuous stream of the selected data pattern
with the default maximum deviation set to 157.5 kHz. Bluetooth uses
2-level FSK (frequency shift keying) modulation that transmits data at
the rate of 1 bit per symbol (1 Msps).
Softkey Location:
BNC MUX Settings
This key accesses a menu of softkeys from which you can modify the
output of the rear panel BNC/SMB connectors.
Softkey Location:
BNC MUX Settings

BPSK

This softkey appears in two different situations, enabling you to either
select a modulation, or load a default I/Q map into the I/Q table editor.
Selecting a BPSK Modulation
Press this softkey to select BPSK (binary phase shift keying)
modulation for modulating a continuous stream of the selected data
pattern. BPSK modulation transmits data at the rate of 1 bit per
symbol. The selected modulation appears in the Mod Type field in the
text area of the display, and under the
Modulation Type menus.
3-24
>
Mode TDMA
> >
Define User I/Q Load Default FIR
> >
Window Kaiser
>
Mode TDMA
>
Data Clk Out
>
Mode Custom
>
Mode TDMA
Real-Time I/Q Baseband Generator User's and Programming Guide
>
desired format
>
Root Nyquist
Beta
>
EDGE (Rev 8.3.0Release 1999)
>
Bit Clock
>
Predefined Mode
>
EDGE (Rev 8.3.0 Release 1999)
and
Select
ESG Family Signal Generators
Options UN8 and 202
> >
Modify Standard
(or any other
>
>
Bluetooth
>
softkeys in the
PSK