Figure 1-2 Name Of Each Part (Rear View) - Hitachi 65 Instruction Manual

(2) Rear view
Serial port (COM1)
Main power switch
AC inlet
Audio port
Upper: LINE IN
Lower: LINE OUT
ACT/LINK lamp
Communication speed lamp
(*1) If a display unit connected with DisplayPort is turned off, the display cannot be detected.
(*2) This slot cannot be used because the RAID board is installed.
(*3) The internal connection is PCI Express x4, but the connector shape is PCI Express x8.
(*4) The internal connection is PCI Express x1, but the connector shape is PCI Express x4.
(*5) Serial port (COM2) and External contact port (EXT) are optional ports.
USB3.0 port (2 ports)
DisplayPort (*1)
DVI-D port A
LAN port
Left: LAN1
Right: LAN2
USB3.0 port
(4 ports)

Figure 1-2 Name of Each Part (Rear View)

DVI-D port B
Serial port (COM2) (*5)
External contacts port (EXT) (*5)
Extension slots (From left to right)
Slot1: PCI Express x4 (*2) (*3)
Slot2: PCI Express x4
Slot3: PCI Express x4
Slot4: PCI Express x16
Slot5: PCI Express x1 (*4)
Slot6: PCI
Slot7: PCI
Slot1：PCI Express x4 (*2)
1-6
1. GETTING STARTED