6.3 Installing and Removing Components
6.3.1 Types and locations of installed components
The figure below shows the types and locations of the components installed in this equipment.
HDD
Main memory slot
(from right to left,
A1 and A2 and B1
and B2)
Lithium battery
Power Supply Unit
The cover of the
equipment
(*1) This slot cannot be used because the RAID board is installed.
(*2) The internal connection is PCI Express x4, but the connector shape is PCI Express x8.
(*3) The internal connection is PCI Express x1, but the connector shape is PCI Express x4.
Dust filter
DVD drive
B2
Figure 6-1 Types and Locations of Installed Components
A2
Slot 1(PCI Express x4)
(*1)(*2)
6-5
6. CHECKUP AND MAINTENANCE
Front fan
Slot 6, 7(PCI)
Slot 5(PCI Express x1) (*3)
Slot 4(PCI Express x16)
Slot 2, 3(PCI Express x4)
Fan duct