Table of Contents
Advertisement
1.1.2. ...with external devices
As you can see, the BeatStep Pro can be at the center of some amazing systems.
1.1.2.1. CV/Velo/Gate/Drum Gate
The front panel of the BeatStep Pro allows you to take command of all sorts of external
devices through its Pitch, Velo and Gate connectors. It also can send data to those devices
from the USB port of your computer.
1.1.2.2. MIDI devices
There are lots of great devices that only have MIDI ports (no CV/Gate connectors, no USB).
BeatStep Pro can control them from its front panel as well. And of course it can send and
receive MIDI data using the USB port of your computer.
Use the included adapters (1/8" TRS jack to 5-pin DIN, gray) to connect your external MIDI devices
to the BeatStep Pro.
1.1.2.3. Clock sources/destinations
The Clock input and output can synchronize with older clock types such as 24 pulses per
quarter note (ppqn), 48 ppqn, 2 ppqn, or even a single pulse per step.
The included adapter (1/8" TRS jack to 5-pin DIN, black) can be used to connect DIN sync
capable devices to the BeatStep Pro. See the chapter on
information about what cables to use with other sync connections and formats.
Arturia - User Manual BeatStep Pro - BeatStep Pro Overview
Synchronization [p.74]
for specific
6
Advertisement
Table of Contents
