Table of Contents
Advertisement
10.9.2. Touch Strip
10.9.2.1. MIDI Send/Receive
Use the pull-down menu to specify whether the BeatStep Pro will send and reeceive MIDI
controller data. The range of transmitted and recognized values is detailed in
Touch Strip with a DAW
10.9.2.2. MIDI CC
Use the virtual knob or the value field to select the MIDI CC number the Touch Strip will
transmit and receive.
10.9.2.3. Using the Touch Strip with a DAW
The activity on the touch strip can be recorded into a DAW when the MIDI Send/Receive
parameter is enabled. It will send values for MIDI CC #9 by default, but you can select a
different MIDI CC# as described above.
The touch strip will send only the following values:
Touch strip region
1/4
1/8
1/16
1/32
release value
However, if you draw a controller curve for the touch strip in your DAW the BeatStep Pro will
respond to the values in the following way:
MIDI CC value received
1-25
26-50
51-75
76-100
117
[p.117].
Touch strip region selected
1/4
1/8
1/16
1/32
Arturia - User Manual BeatStep Pro - MIDI Control Center
MIDI CC value
25
50
75
100
0
Using the
Advertisement
Table of Contents
