Table of Contents
Advertisement
3.6. Copying a pattern between SEQ1 and SEQ2
The BeatStep Pro allows you to copy patterns from one melodic sequencer to the other. For
example, if you'd like to copy pattern 01 from SEQ1 into pattern 04 of SEQ2:
•
Press the SEQUENCER 1 button.
•
Select pattern 01.
•
Press and hold the SAVE button until the final step.
•
Press and hold the SEQUENCER 2 button until the final step.
•
Press Step button 4 to select the destination pattern. Sequencer 2 will display a
blinking "04" to indicate that the pattern is being written to the new location.
•
Release all buttons.
3.7. Clearing a pattern
The process of
clearing a pattern [p.20]
37
is described in the Basics chapter.
Arturia - User Manual BeatStep Pro - The Step Sequencers
Advertisement
Table of Contents
