Table of Contents
Advertisement
1.2.2. Preset/Project utility
1.
Transpose Link [p.55]
2.
Preset Link [p.56]
3.
Preset Length section [p.9]
4.
MIDI Channel [p.57]
1.2.2.1. TRNS LNK button
TRNS LNK enables Sequencer 1 and Sequencer 2 to be transposed simultaneously; when the
pitch of one is changed, the other will follow. There's more information about this feature in
the
Transpose Link [p.55]
1.2.2.2. PRST LNK button
PRST LNK allows the three sequencers to have their preset patterns linked so they can be
changed with a single action.
The operation of these features is described in the
[p.49]
chapter.
1.2.2.3. Preset Length section
BeatStep Pro sequences can be up to 64 steps long, consisting of up to four 16-step
subdivisions that play one after the other. Those are called the Step Groups.
The four LEDs above the double arrow buttons (<< and >>) are used to indicate the pattern
length and which Step Group is currently playing.
The LST STEP button is used with the Step buttons and the << >> buttons to change the length
of the current sequence.
For a complete description of these features, see the
Step Sequencers [p.24]
[p.38]
chapter.
1.2.2.4. MIDI channel button
Each of the sequencers can be set to its own MIDI channel using this button. For information
on how to do this, see the section
chapter.
9
section of the
Projects [p.49]
chapter or the
Pattern Length [p.43]
Selecting MIDI Channels [p.57]
Arturia - User Manual BeatStep Pro - BeatStep Pro Overview
chapter.
Preset Link [p.56]
section of the
Sequence Length [p.31]
section of the
in the
Projects
section of the
Drum Sequencer
Projects [p.49]
Advertisement
Table of Contents
