Table of Contents
Advertisement
8.1.3. CV/Gate specifications
Some analog synthesizers have unusual implementations that are not fully compatible
with the BeatStep Pro CV/Gate signals. Please refer to their specifications before making a
purchase so you can be sure the two devices will work together well.
We've designed the BeatStep Pro to be as flexible as possible, though: the
Center [p.84]
allows you to configure the response of the CV/Gate jacks in a number of ways.
These are the electrical signals that can be sent by the BeatStep Pro CV and Gate jacks:
•
Control Voltage (Pitch) has two options:
•
Gate output has two options:
The
MIDI Control Center [p.84]
for SEQ1 and SEQ2.
77
1 Volt/octave (0-10V)
◦
0 Volt MIDI note range: 0-127 (Volt/octave)
▪
Hertz per Volt
◦
1 Volt MIDI note range: 0-127 (Hz/Volt)
▪
V-trigger (positive or "voltage"), trig voltage is between 10V and 12 V
◦
S-trigger (negative, or "short")
◦
allows each of these settings to be configured independently
Arturia - User Manual BeatStep Pro - CV/Gate functions
MIDI Control
Advertisement
Table of Contents
