Table of Contents
Advertisement
5.8. Preset Link
When the PRST LNK button is lit the sequencer presets are linked, which makes it possible
to change the patterns on all three sequencers with a single action. You can use any one of
the sequencers to make the change:
•
Press one of the single arrow buttons in the
•
Hold the SEQ1, SEQ2 or DRUM button and press a Step button.
There's a
MIDI Control Center [p.84]
determines whether the patterns will change to the same pattern number (the Absolute
setting) or be allowed to change to non-identical pattern numbers (the Relative setting).
Examples of each response are given in the
chapter.
♪: When the PRST LNK button is active the pattern will wait to change until the Drum pattern reaches
its end. If
Polyrhythm Mode [p.63]
will occur.
Arturia - User Manual BeatStep Pro - Projects
preference related to the PRST LNK button that
Pattern Link [p.114]
is also active, the longest Drum track will determine when the change
Sequencer control [p.11]
section of the
section, or
MCC [p.84]
56
Advertisement
Table of Contents
