Table of Contents
Advertisement
SMA Solar Technology AG
Manipulation of system data in networks
You can connect the supported SMA products to the Internet. When connected to the Internet, there is a risk that
unauthorized users can access and manipulate the data of your system.
• Set up a firewall.
• Close unnecessary network ports.
• If absolutely necessary, only enable remote access via a virtual private network (VPN).
• Do not use the port forwarding feature. This also applies to the used Modbus ports.
• Disconnect system components from other network components (network segmentation).
Access to data points after activating the Modbus interface
The read-only access to data points is possible after activating the Modbus interface. The write-only access to all
designated data points is possible. All parameter changes are shown on the user interface of the SMA product.
• Ensure that the Modbus interface is still active after resetting the SMA product to default settings.
Technical Information
NOTICE
SMAModbus-ennexOS-TI-en-10
2 Safety
7
Advertisement
Table of Contents
