Parameters - Siemens 6ES7141-6BG00-0BB0 Equipment Manual

EtherNet/IP
5.1 Functions/parameters/address space
Supported CIP objects for EtherNet/IP
The table below shows the CIP objects that the I/O device supports with EtherNet/IP.
Supported CIP objects
Identity object
Assembly object
Connection Manager object
TCP/IP Interface object
EtherNet Link object
LLDP Management object
LLDP Data Table object
Param object
5.1.2

Parameters

The table below shows the parameters for the I/O device digital inputs
DI 8x24VDC M12‑L 8xM12.
Table 5-1 Configurable parameters and their defaults (GSD file)
Parameters
Dual assignment of the socket •
Diagnostics: Low voltage 1L+
Diagnostics: Short-circuit
Diagnostics: Wire break detec­
tion and alarm
Input delay
Hardware interrupt on rising
edge
Hardware interrupt on falling
edge
* = Short-circuit monitoring of the socket takes place once via Pin 1 (1L+) and Pin 3 (1M).
36
Value range
Deactivated
• Activated
• Deactivated
• Activated
• Deactivated
• Activated
• Deactivated
• Activated
• 0.05 ms
• 0.1 ms
• 0.4 ms
• 0.8 ms
• 1.6 ms
• 3.2 ms
• 12.8 ms
• 20 ms
• Deactivated
• Activated
• Deactivated
• Activated
Default
Deactivated
Deactivated
Deactivated
Deactivated
3.2 ms
Deactivated
Deactivated
I/O device digital inputs DI 8x24VDC M12-L 8xM12 (6ES7141-6BG00-0BB0)
Equipment Manual, 03/2023, A5E46570417-AD
Remarks
FW 5.1.x or higher
FW 5.1.x or higher
FW 5.1.x or higher
FW 5.1.x or higher
FW 5.1.x or higher
FW 5.1.x or higher
Not supported
FW 5.1.x or higher
Effective range with con­
figuration software, for
example, MFCT
Channel group
Channel
Channel/channel group*
Channel
Channel
Channel
Channel