11 SERVICE WORK ON THE CHASSIS
11.22
11.23
56
V00280-11
V00279-11
Removing the seat
H00066-10
Mounting the seat
H01431-10
(50 SX MINI)
–
Push splash protector
–
Position the shock absorber with screw
the desired seating height.
–
Raise the link fork; position the shock absorber with
3
screw
.
–
4
Mount nut
and tighten the fitting.
Guideline
Screw, top
M10
shock absorber
–
5
Mount nut
and tighten the fitting.
Guideline
Screw, bottom
M10
shock absorber
–
Install the rear wheel.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Open quick release
and raise the rear of the seat.
–
Pull back the seat and remove it.
–
1
Hook seat onto screw
push it forward.
2
Holding lug
hooks into the fuel tank.
1
to the side.
2
, depending on
45 Nm (33.2 lbf ft)
Loctite
®
45 Nm (33.2 lbf ft)
Loctite
®
(
p. 90)
p. 40)
and lower the seat at the rear and
243™
243™