Carburetor - Idle Setting (50 Sx, Factory Edition); Carburetor - Idle Setting (50 Sx Mini); The Idle Speed - KTM 50 SX 2022 Owner's Manual

15 TUNING THE ENGINE
15.3
15.4
100
400192-11
Carburetor – idle setting (50 SX, FACTORY EDITION)
S03218-10
Carburetor – idle setting (50 SX MINI)
H00078-10
–
2
Turn barrel adjuster so that there is play
cable at the throttle grip.
Guideline
Play in throttle cable
–
3
Tighten nut .
–
1
Slide on sleeve .
Finishing work
–
Install the fuel tank. (
–
Mount the seat. ( p. 56)
–
Check the play in the throttle cable. (
The idle setting of the carburetor has a big influence on the start-
ing behavior, stable idle speed, and the response to throttle open-
ing. This means that an engine with a correctly set idle speed will
be easier to start than one with an incorrectly set idle speed.
Info
The carburetor and its components are subject to increased
wear caused by engine vibration. Wear can result in mal-
functioning.
The idle speed is adjusted using the idle speed adjusting
1
screw .
The idle mixture is adjusted using the idle air adjusting screw
The idle setting of the carburetor has a big influence on the start-
ing behavior, stable idle speed, and the response to throttle open-
ing. This means that an engine with a correctly set idle speed will
be easier to start than one with an incorrectly set idle speed.
Info
The carburetor and its components are subject to increased
wear caused by engine vibration. Wear can result in mal-
functioning.
The idle speed is adjusted using the idle speed adjusting
1
screw .
The idle mixture is adjusted using the idle air adjusting screw
A
in the throttle
3 ... 5 mm (0.12 ... 0.2 in)
p. 52)
p. 99)
2
.
2
.