12 BRAKE SYSTEM
86
Guideline
Screw, brake linings M5
–
Mount lock ring
–
Operate the foot brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
–
Add brake fluid up to level
Guideline
A
Level
(brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
H01654-10
–
Position cover with washer and membrane.
–
Mount and tighten the screws.
Info
Immediately clean up any brake fluid that has over-
flowed or spilled with water.
Finishing work
–
Remove the motorcycle from the lift stand. (
8 Nm (5.9 lbf ft)
1
.
A
.
10 mm (0.39 in)
p. 134)
p. 40)