Next steps
1. If removed, install the front bezel.
2. Reconnect the peripherals and connect the system to the electrical outlet.
3. Turn on the system, including any attached peripherals.
Related tasks
Installing the optional front bezel
Related reference
Safety instructions
Inside the system
Figure 11. Inside the system
1. cooling fan in the cooling fan assembly (6)
3. DIMMs (24)
5. hard drive backplane (back)
7. hard drive (2) (back)
9. expansion card riser 3
11. expansion card riser 2
13. hard drive backplane
60
Installing and removing system components
2. processor (2)
4. internal USB port
6. vFlash media slot
8. power supply unit (2)
10. network daughter card
12. expansion card riser 1