Removing An Expansion Card From The Expansion Card Riser 1 - Dell E31S Series Owner's Manual

Figure 33. Installing an expansion card into the expansion card riser 2 or 3
1. expansion card
3. expansion card riser
5. expansion card connector
Next steps
1. Follow the procedure listed in the After working inside your system section.
2. Install any device drivers required for the card as described in the documentation for the card.
Related tasks
Before working inside your system
After working inside your system
Related reference
Safety instructions
Removing an expansion card from the expansion card riser
1
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
2. expansion card latch
4. power connector (for GPU cards)
Installing and removing system components 91