Refrigeration controller, type EET series
Wire routing
Figure 21: Wire routing
A
Recommended to provide U-loop to avoid any water droplet entering into the controller due to capillary
action.
Accessories
KoolKey
KoolKey (EKA 200): Acts as a gateway to connect PC tool KoolProg and also a programming key.
Figure 22: KoolKey (EKA 200) as gateway
B
A
Figure 23: KoolKey (EKA 200) as programming key
A
Refer to the KoolKey
installation guide
Mass Programming Key (EKA 201)
Mass Programming Key (EKA 201) - only for EETa controllers: Simple Programming key for programming the
controller in production assembly line.
© Danfoss | Climate Solutions | 2023.07
A
D
C
B
C
for detailed instructions.
A
Standard Micro-USB cable
B
KoolKey
C
Interface cable
D
Controller
A
Koolkey
B
Interface cable
C
Controller
BC320944106159en-000301 | 13