PROAIM CINEMA P-W5R-GRND Assembly Manual page 14

•
Hook 1 meter blue cable to the wire
tensioner and hook it into the cable slot of
section 8th of the jib section then secure the
wire with the help of the locking knob.
NOTE: If the length of the wire is short, loosen
the hook to increase its size.
•
Similarly, attach the other hook joint
properly to the other wire part and secure
the wire.
•
After attaching the blue wire, lock the wire
properly with a safety pin.
•
The blue wire is properly connected to the
jib section as shown in the image.
Attaching the Yellow
NOTE: Join all the yellow cables together, make one long cable, and attach it to the Jib.
•
Connect the yellow cable to the hook
already attached to the central fork yellow
wire.
NOTE: If the length of the wire is short, loosen
the hook to increase its size.
•
Connect the yellow cable to the wire
attached to the head section.
•
Similarly, connect the other hook joint to
the other wire part properly.
Stability Cables
14