•
Loosen and remove the bolt of Section 2
using the Allen key.
•
Align the cable guide support rod on Section
2 and re-insert the bolt.
•
Re-tighten the bolt using an Allen key as
shown in the image.
•
Attach 2 big hooks on both slots on cable
guide.
•
Follow the same process for the second pair
of hooks.
Attaching the
Red
NOTE: Its color-coded suspension cables let
you assemble the entire setup quickly.
•
Insert one end of the cable into the hook of
the cable guide rod, then attach the other
end of the cable to the clamp of Section 1.
NOTE: If the length of the wire is short, loosen
the hook to increase its size.
Stability Cables
12