Advertisement
•
Red wire is properly connected with jib
section 1.
•
Follow the same procedure for the other
short red wire as shown in the image.
•
Insert one end of the cable into the hook of
the cable guide rod, then attach the other
end of the cable to the clamp of Section 8.
•
Follow the same process to attach the
2nd wire with the Jib, as shown in the
image.
•
Insert one end of the red cable into the hook
of the cable guide rod section 2nd then
attach the other end of the cable to the
clamp of Section 8.
Feature: Its color-coded suspension cables let
you assemble the entire setup quickly.
Attaching the
Blue
•
Attach the two Blue cables with the hook of
Section 1.
NOTE: Align the cable to the cable guide from
side and adjust the cable with help of wire
tensioner. Same approach apply at other side
of jib
•
Connect the end of the two blue cables into
the slot of section 8th with the help of the
knob.
•
Connect the other blue wire into the slot of
the same jib section 8 and adjust the length
of the wire with the help of a wire tensioner.
Stability Cables
13
Advertisement
