Infinity 600 FL Owner's Manual page 12

Fitting the fire liners

Once the firebox is secured into position fit either the vermiculite or brick back liners supplied.

Position the 2- piece rear liner behind the 3 lugs located at the bottom rear of the firebox. The vermiculite
liner has a vertical joint and the brick back has a horizontal joint. Ensure these are aligned centrally.

Rest the side liner on the location bracket on either left or right hand side of fire box. Push up and into
position. The vermiculite liners are reversible but the brick back liners will only fit one way.

Once liners are in place fit the air-tray and lay fuel bed.
* Please note: When fitting the optional black glass liners, removal of the burner tray may be required to give
adequate clearance.

Place air tray within burner shelf assembly and cover the burner plate with a thin layer of chippings. (NG ONLY)

Place air tray within burner shelf assembly and cover the burner plate with a thin layer of vermiculite. (LPG
ONLY)
12 LT6125 (ISS 13)