Analogcontrol - Omron STC-LBS132POE-SWIR Product Specifications And User's Manual

12.4

AnalogControl

Name
GainSelector
Gain [GainSelector]
GainAuto [GainSelector]
GainAutoLimitMin [GainSelector]
GainAutoLimitMax [GainSelector]
BloomingReductionMode [GainSelector]
AutoLuminanceTarget
AutoLuminanceRegionSelector
AutoLuminanceWidth
[AutoLuminanceRegionSelector]
AutoLuminanceHeight
[AutoLuminanceRegionSelector]
AutoLuminanceOffsetX
[AutoLuminanceRegionSelector]
AutoLuminanceOffsetY
[AutoLuminanceRegionSelector]
AutoLuminanceWeight
[AutoLuminanceRegionSelector]
AutoLuminancePeak
BlackLevelSelector
BlackLevel [BlackLevelSelector]
DigitalGainOffsetMode
AnalogGainOffsetMode
BlackLevelCorrection
Gamma
STC-LBS132POE-SWIR
Product Specifications and User's Guide
Description
Selects which Gain is controlled by the various Gain features.
Controls the selected gain as an absolute physical value.
Sets the automatic gain control (AGC) mode.
Determine the lower limit of gain when Gain Auto is set to Continuous.
Determine the upper limit of gain when Gain Auto is set to Continuous.
Blooming Reduction Mode is enabled.
Target brightness for auto luminance control.
Select the area for auto luminance control.
Determine width of targeted region for auto luminance control.
Determine height of targeted region for auto luminance control.
Determine X offset of targeted region for auto luminance control.
Determine Y offset of targeted region for auto luminance control.
Weight of the area determined by Auto Luminance Region Selector for
auto luminance control.
Ratio of peak and average for auto luminance control.
Selects which Black Level is controlled by the various Black Level
features.
Controls the analog black level as an absolute physical value.
Digital Gain Offset Mode is enabled.
AnalogGainOffsetMode is enabled.
Black Level Correction Mode is enabled.
Controls the gamma correction of pixel intensity.
No.21S102-02
61/71