1.2 Work Area
Operator work area
When the machine is powered on, the only acceptable operator location in the
work area is standing in front of the control stand on the opposite side of the
conveyor (see picture above) Never place any material on the conveyor except
the piece to be cut.
1.3 Danger Zones
•
The carriage
The area between the face plate or carriage and the saw, drill, puncher
•
or any other machines
These areas are always dangerous and have the potential to harm the operator
or others. Use safety precautions when working inside these areas.
1.4 Technical Specifications
General Data
Weight
Travel speed
Power supply
Current
Fuse positioning controller
Gauge arm extension
Operating Temperature
8 lbs per ft measuring length without conveyor
16in/sec (other upon request)
115 V AC 60 Hz
24 V DC
Max 5 A
6A, slow-blow fuse 20 x 5 mm
12 inches (others upon request)
+ 5° C to + 45° C (41°F to 113°F)
6
Input power
Operating power