Kentucky PD1000 Instruction Manual page 17

Pre-mounted
rack on
aluminum
guide section

Push down motor with spur gear to not hit pre-mounted rack screws
and rack

Release pushed down motor when spur gear has passed the rack

Tighten motor set screw. Gap between end of screw and planetary
gear box housing should not exceed 1/32in
Reset motor screw
to prevent spur
gear from jumping
off the rack
Systems long in length may require shipment and
subsequent assembly in sections, please follow 5.1.5 and
5.1.6 for instructions (otherwise omit).
Push down motor with one hand
17
Pre-mounted screws to
mount separate rack to
connect aluminum guide
sections
Direction to
slide on carriage