Intended Gauge Use; Check Before Power On - Kentucky PD1000 Instruction Manual

6. Intended Gauge Use

6.1 Check before turning power on
Danger!
Danger caused by devices on top of the roller table.
Personal injury possiblity such as bruise etc.
It is not allowed to put any parts or devices on the roller table.
•
Only the part to be worked with can be on top of the roller table located
•
only between machine and gauge arm, never on the other side.
Danger!
Danger caused by second or additional personal while running the gauge. Immediate
impending life threating or personal injury possiblity if caution is not taken.
While running the machine ensure that no other person is within the danger areas of
the gauge
Caution!
Danger caused by wrong adjusted pneumatic device.
Personal injury possiblity if air pressure is to high. Pneumatic cylinders might move
faster and have more force
Adjust air pressure to 116psi (8bar) before installation
•
Check air pressure frequently before running the machine
•
Caution!
Danger caused by not using or inproper use of the roller safety inserts
Personal injury possiblity such as bruise or cuts.

Do not allow unauthorized personnel to operate the machine or
stand nearby.

Do not put any material or parts on top of the roller table.

Put on gloves and other safety devices.
6.2 Power "ON"
Danger!
Danger caused by stroke of the gauge arm.
Personal injury possiblity such as bruise or cuts.
Reduce cylinder stroke speed by adjusting the throttle valve.
Danger!
Danger caused by not wearing safety equipment like glasses and gloves.
Immediate impending personal injury possiblity if caution is not taken.
23