Transportation; Installation Location - Kentucky PD1000 Instruction Manual

Rack & pinion automatic stop system
Table of Contents

Advertisement

4. Transportation of the gauge
Danger!
Danger caused by moving loads. Immediate impending life threating or personal
injury possiblity by moving and dropping the gauge with a crane.
Don't stay underneath the lifted gauge.
The minimum age for operating personal is 21 years.
Personal has to be authorized and trained before using a crane, a forklift
or any other transportation vehicle
Avoid bumping the gauge during transportation damage may occur.
Use a crane or a vehicle with allowed maximum weight of 1500lbs.
Move gauge only at slow speed.
Gauge might topple over if moved too quickly.
Do not drive on any ramp while moving the gauge.
4.1.

Installation Location

The load carrying capacity of the floor has to be minimum 300lbs per square
meter.
5.
Installation
Danger!
Danger caused by second or additional personal while testing and running the
gauge. Immediate impending life threating or personal injury possiblity if caution is
not taken.
Before installation and while running the machine ensure that no other person is
within the danger areas of the gauge
Note!
Before installation check gauge for any damages or defects
Eliminate any damage or defect before installing or running the gauge. Contact the
manufacturer if required.
12

Advertisement

Table of Contents
loading

Table of Contents