Kentucky PD1000 Instruction Manual page 14

5.1.2 Assemble Kentucky Gauge conveyor series (if
conveyor is purchased)

Place conveyor near saw, drill or punch

Mount each height adjustable leg to the conveyor

Level the conveyor using a level and the height adjustable bolts
Fester Backen Saw clamp
Richtschiene
Metal guide
Adjust the conveyor so it is leveled lengthwise using a metal guide
set in the saw clamp.

Be sure the conveyor sections are straight and properly aligned.
See below.

Anchor the legs to the floor

Tighten the bolts between the legs and the conveyor.
5.1.3 Mount aluminum guide section to conveyor

Align the aluminum guide with the conveyor using a lift, saw horses,
or some other appropriate means.
Sägeblatt
Saw Blade
Steel guide
Führungsschiene
Saw blade
14
Rollenbahn
Conveyor
conveyor