Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Peak Scientific PG14L
Summary of Contents for Peak Scientific PG14L
- Page 1 PG Range User Manual 2021 © Peak Scientific - Rev. 10 - 03/03/2021...
-
Page 2: Table Of Contents
PG Range User Manual Contents Change History How to Use This Manual Introduction Warranties and Liabilities Safety Notices Symbols Safety Notice to Users Environmental Declaration Technical Specification Environment Outlet Gas Electrical Requirements General Unpacking Contents Unpacking Instructions Installation Generator Environment Voltage and Power General Dimensions External Connections... -
Page 3: Change History
Please review each of the following sections carefully. Thank you for selecting Peak Scientific to meet your Gas Generation needs, and should you require any further assistance or support please do not hesitate to contact Peak Scientific or the Peak Partner from which you purchased your Generator. -
Page 4: Introduction
User Manual Introduction Welcome to the User Manual for the Peak Scientific Purge Gas Range. Enclosed in this manual you will find the information required to ensure that your Purge Gas Generator is operated according to our recommended guidelines which will prepare you for a long and trouble free life. -
Page 5: Warranties And Liabilities
PG Range User Manual Warranties and Liabilities The Company warrants that it has title to the Goods. 2. Subject to the provisions of this clause the Company warrants that the Goods shall comply in all material respects with any specification referred to in the Order Confirmation (as the same may be amended) and shall, subject thereto, be free from defects in material and workmanship for the lesser of a period of twelve months from the date... -
Page 6: Safety Notices
These instructions must be read thoroughly and understood before installation and operation of your Peak Generator. Use of the Generator in a manner not specified by Peak Scientific MAY impair the SAFETY provided by the equipment. When handling, operating or carrying out any maintenance,... - Page 7 PG Range User Manual EU Declaration of Conformity Peak Scientific Instruments Ltd. Fountain Crescent, Inchinnan, Renfrewshire, PA4 Declare that: Equipment: Dry Air Purge Gas Generators Model: PG14L & PG28L To which this declaration relates, is in conformity with the applicable EC directives, harmonized standards, and other normative requirements.
-
Page 8: Environmental Declaration
Where a specific certificate of compliance is required, this can be requested, on a product serial number basis, directly from Peak Scientific Instruments Ltd, by contacting us through our website on www.peakscientific.com... -
Page 9: Technical Specification
IEC Euro Connector Pollution Degree Insulation Category Replacement Fuse (UK only) General Generator weight PG14L – 14.4 kg (31.7 lb) PG28L – 18.6 kg (41.0 lb) Shipping weight PG14L – 15.9 kg (35.0 lb) PG28L – 20.1 kg (44.3 lb) Page 9... -
Page 10: Unpacking
PG Range User Manual Unpacking Although Peak Scientific takes every precaution with safe transit and packaging, it is advisable to fully inspect the unit for any sign of transit damage. Check ‘SHOCKWATCH’ label for signs of rough handling prior to un-packing –... -
Page 11: Contents
PG Range User Manual Contents Each shipping box should contain the following: - PG Generator Mains Cable Installation Guide Unpacking Instructions The PG 14L and 28L generator weigh approximately 14.4 and 18.6 Kg, respectively, and as such should only be lifted using safe lifting practice. Open packaging, and remove foam. -
Page 12: Installation
The PG14/28L are fitted with an internal switch mode power supply that will accept a power inlet from 100VAC - 240VAC, 50/60HZ. The current consumption is 80 mA. Please ensure generator is positioned so as to permit easy disconnection if required. General Dimensions PG14L 459.3 Page 12... - Page 13 PG Range User Manual PG28L 459.3 Page 13...
-
Page 14: External Connections
PG Range User Manual External Connections Connect the unit to a suitable electrical supply. Attach a suitable air supply to the inlet port of the filter. Note that the inlet and outlet air connections are ¼” BSP Female. Attach the outlet of the generator to your instrument and ensure that you do not draw any more than the specified amount of purified air from the system. -
Page 15: Electrical Connection
PG Range User Manual Electrical Connection Connect the Generator to an appropriate 110 - 230 volt single-phase supply, refer to the generator serial plate for input specification and ensure your supply matches the requirements. If the appropriate power cord is not supplied; a new plug, rated to at least 12 amps, can be fitted by a qualified electrician. -
Page 16: Start-Up Procedure
PG Range User Manual Start-up Procedure Connect the fitting to the input of the filter on the generator and connect to your in house air supply. Restrict output to the manufacturer specification. Ensure that the power to the Purge Gas Generator is turned on before starting the air supply. - Page 17 Not all warranties are alike and Peak Scientific stand out against other gas suppliers as we offer a comprehensive, quick response, on-site warranty. This means that in the very...
-
Page 18: Normal Operation
PG Range User Manual Normal Operation Principal of Operation The Purge Gas Generator works using Pressure Swing Adsorption (PSA). PSA works on the principle that an adsorbent (such as the activated alumina used in the PG series) has a differential adsorbing capacity at high and low pressure. -
Page 19: Service Requirements
PG Range User Manual Service Requirements Routine Maintenance Servicing and/or repair of the Generator should only be undertaken by a TECHNICALLY COMPETENT PERSON, with the generator in its safely isolated condition. Safely Isolated Condition; The unit is in a Safely Isolated Condition when it is disconnected from its application, fully de- pressurised and isolated from the Electrical Supply. -
Page 20: Service Schedule
08-8222 12 months Service Plans Peak Scientific offer two service plans. The Complete Service Plan, specifically designed for Generators operated in critical environments, also includes full breakdown cover, guaranteed response times and Generator upgrades if available. Our Standard Service Plan, covering the basic needs of our Generators, features special deals on spare parts and breakdowns. - Page 21 Peak Scientific UK Peak Scientific North America Peak Scientific India Peak Scientific Africa Fountain Crescent 19 Sterling Road 202, Amsri Shamira PO Box 478 Inchinnan Business Park Suite #1 Old Lancer Line Somerset Mall Inchinnan Billerica, MA 01862 Opp. St. Mary’s Degree College...
Need help?
Do you have a question about the PG14L and is the answer not in the manual?
Questions and answers