Kia Cerato 2009 Service Manual page 75

29. Remove the steering u-joint mounting bolt(A).
30. Remove the front muffler(A).
31. Using a floor jack, support the engine and transaxle assembly.
After removing the sub frame mounting bolt , the engine and transaxle assembly may fall downward,
and so support them securely with floor jack.
Verify that the hoses and connectors are disconnected before removing the engine and transaxle
assembly.
32. Remove the sub frame bolts and nuts.
Tightening torque :
Bolt(A) : 39.2 ~ 53.9N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8lbf.ft)
Nut(B),Bolt(C) : 156.9 ~ 176.5N.m
(16.0 ~ 18.0kgf.m, 115.7 ~ 130.2lbf.ft)