Kia Cerato 2009 Service Manual page 30

5. Install the high pressure pump(A), connecting the hoses(B, C).
Tightening torque :
14.7 ~ 19.6N.m (1.5 ~ 2.0kgf.m, 10.8 ~ 14.5lbf.ft)
6. Install the high pressure pipe(A).
7. Set the key of crankshaft sprocket to be aligned with the timing mark of timing chain case. As a result of
this, place the piston on No.1 cylinder at the top dead center on compression stroke.