2009 > D 1.6 TCI-U >
REMOVAL
INTAKE MANIFOLD
1. Remove the engine harness protector(A) mounting bolts.
Tightening torque :
7.8 ~ 9.8 Nm (0.8 ~ 1.0 kgf.m, 5.8 ~ 7.2 lb-ft)
2. Remove the high pressure pipe(A). (Refer th FL Gr.)
3. Remove the fuel temperature sensor mounting bolt(A). (Refer th FL Gr.)
4. Remove the EGR cooler and EGR valve assembly(A).
Tightening torque :
Nut(B) : 29.4 ~ 34.3 Nm (3.0 ~ 3.5 kgf.m, 21.7 ~ 25.3 lb-ft)
Bolt(C) : 21.6 ~ 27.5 Nm (2.2 ~ 2.8 kgf.m, 15.9 ~ 20.3 lb-ft)
Bolt & Nut(D) : 14.7 ~ 19.6 Nm (1.5 ~ 2.0 kgf.m, 10.8 ~ 14.5 lb-ft)