Kia Cerato 2009 Service Manual page 37

26. Install the crankshaft pulley(A) and crankshaft pulley bolt(B).
Tightening torque :
225.6 ~ 245.2N.m (23.0 ~ 25.0kgf.m, 166.4 ~ 180.8lbf.ft)
Use the SST(flywheel stopper, 09231-2A100) to Install the crankshaft pulley bolt, after remove the
starter.
27. Install the drive belt auto tensioner(A).
Tightening torque :
18.6 ~ 27.5N.m (1.9 ~ 2.8kgf.m, 13.7 ~ 20.3lbf.ft)