Kia Cerato 2009 Service Manual page 31

8. After install timing chain "A" with high pressure pump sprocket(B) equipped at the crankshaft sprocket(C),
and then install high pressure pump sprocket at the high pressure pump shaft.
The timing mark of high pressure pump sprocket should be aligned with timing mark on the timing chain
case.
9. Pretighten the high pressure pump sprocket nut.
10. Install timing chain "A" lever(A) and the timing chain guide "1"(B).
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lbf.ft)
11. Install the timing chain "A" auto tensioner(A) and then remove set pin(B).
Tightening torque :
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lbf.ft)