Use the SST(flywheel stopper, 09231-2A100)(A) to tighten the high pressure pump sprocket nut, after
remove the starter.
18. Apply liquid gasket evenly to the mating surface of timing chain cover.
• Standard liquid gasket : LOCTITE 5900
• Check that the mating surfaces are clean and dry before applying liquid gasket.
• Assemble the timing chain cover in 5 minutes after applying the liquid gasket.
• Apply liquid gasket in a 3mm wide bead without stopping.
19. Install the timing chain cover(A).
Tightening torque :
Bolt (B,C,F) :