12. Align the timing mark(A) of camshaft sprocket on the vertical center line of crankshaft.
13. Install the timing chain "C"(A) as following procedure. High pressure pump sprocket -> LH camshaft
sprocket -> RH camshaft sprocket
The timing mark of each sprockets should be matched with timing mark (color link) of timing chain at
installing timing chain as shown below illustration.
14. Install the timing chain guide "2"(A).
Tightening torque :
9.8 ~ 13.7N.m (1.0 ~ 1.4kgf.m, 7.2 ~ 10.1lbf.ft)