Kia Cerato 2009 Service Manual page 52

(1) Until installing HLA shall be held upright so that diesel oil in HLA should not spill and assured that dust
does not adhere to HLA.
(2) HLA shall be inserted tenderly to the cylinder head not to spill diesel oil from HLA. In case of spilling, air
bent shall be done in accordance with the air bent procedure.
Stroke HLA in diesel oil 4~5 times by pushing its cap while pushing the ball down slightly by hard
steel wire. (Take care not to severely push hard steel wire down since ball is several grames.)
7. Install the cam follower(A).
8. Install the camshaft(A).
9. Install the camshaft bearing caps(A).
Tightening torque :
12.7 ~ 13.7N.m (1.3 ~ 1.4kgf.m, 9.4 ~ 10.1lbf.ft)