Table of Contents
Advertisement
DAILY MAINTENANCE
This must be done with the appliance switched off
and cold.
It must be done with a vacuum cleaner
The entire procedure takes just a few minutes.
•
Open the door and remove the grate (1) in two
parts.
•
Remove the grille (2)
•
Empty the ash tray (3) and grate into a non-
flammable container (the ashes may still contain
embers and/or hot parts).
•
Vacuum out the interior of the hearth, the bed, and
the compartment around the grate into which the
ash falls.
•
Scrape the grate with the provided scraper and
clean out any obstructed holes.
•
If necessary, clean the glass (when cold)
2
MAINTENANCE
3
Note that using the fireplace
without cleaning the grate can
cause the gas in the combustion
chamber to ignite and break the
door glass.
Once you have finished cleaning
the fireplace, make sure the
grate
is
PROPERLY
failure to do so can cause the
fireplace to malfunction.
Before starting up the fireplace,
make sure the grate is seated
properly
without
uncombusted
matter
around its border
1
SEATED;
ash
or
trapped
35
Advertisement
Table of Contents
