Table of Contents
Advertisement
FIRST IGNITION (COMMISSIONING) PHASES
•
Make sure you have read and understood this
manual
•
Remove all flammable materials from the appliance
(manuals, labels, etc.). In particular remove any
labels from the glass.
On first ignition, there may be a slight
smell of paint, which will disappear in a
short time.
OPENING THE DOOR WITH THE LEVER
To open the door (for regular cleaning and first time)
To open the door (for regular cleaning and first time)
use the appropriate lever (removable handle)
use the appropriate lever (removable handle)
See figure 15.
See figure 15.
LOADING THE PELLETS INTO THE PELLET
TANK
Depending on the version, you can load the pellets:
Depending on the version, you can load the pellets:
• •
via the trapdoor
via the trapdoor
• •
via the front drawer
via the front drawer
Load the pellets by removing the frontal drawer.
Use the glove when the appliance is hot. The pellets
can be loaded even when the fire is burning.
INSTALLATION
FUEL
Use UNI EN ISO 17225-2 category A1 wood pellets
Use UNI EN ISO 17225-2 category A1 wood pellets
or similar regulatory products with the following
or similar regulatory products with the following
characteristics.
characteristics.
diameter 6 mm
diameter 6 mm
length 3-4 cm
length 3-4 cm
humidity <10 %
humidity <10 %
For reasons of safety and environmental compatibility,
DO NOT burn plastic, painted wood, coal, bark or
other such materials in the stove.
Do not use the product as an incinerator.
protective lever
protective lever
Caution
Using fuels other than those specified can
damage the appliance
23
Advertisement
Table of Contents
