Cisco Catalyst 9500 Manual page 219

Configuring Online Diagnostics
Step 6
Step 7
Step 8
Step 9
Step 10
Command or Action
diagnostic monitor switchnumber test {name
| test-id | test-id-range | all}
Example:
Device(config)# diagnostic monitor
switch 2 test 1
end
Example:
Device(config)# end
show diagnostic { content | post | result |
schedule | status | switch }
show running-config
Example:
Device# show running-config
copy running-config startup-config
Example:
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
Configuring Health-Monitoring Diagnostics
Purpose
• test-id: ID number of the test that appears
in the show diagnostic content command
output.
• test-id-range: ID numbers of the tests that
appear in the show diagnostic content
command output.
• all: All the diagnostic tests.
The range for the failure threshold count is 0
to 99.
Enables the specified health-monitoring tests.
The switch number keyword is supported only
on stacking switches.
When specifying the tests, use one of these
parameters:
• name: Name of the test that appears in
the show diagnostic content command
output.
• test-id: ID number of the test that appears
in the show diagnostic content command
output.
• test-id-range: ID numbers of the tests that
appear in the show diagnostic content
command output.
• all: All the diagnostic tests.
Returns to privileged EXEC mode.
(Optional) Display the online diagnostic test
results and the supported test suites.
(Optional) Verifies your entries.
(Optional) Saves your entries in the
configuration file.
203