Cisco Catalyst 9500 Manual page 116

Configuring the Call Home Service for Direct Cloud Access
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
100
Command or Action
profile CiscoTAC-1
Example:
Device(config-call-home)# profile
CiscoTAC-1
destination transport-method http
Example:
Device(config-call-home-profile)#
destination transport-method http
destination address http url
Example:
Device(config-call-home-profile)#
destination address http
h t t p s : / / t o o l s . c i s c o . c o m / i t s / s e r v i c e / o d d c e / s e r v i c e s / D D C E S e r v i c e
active
Example:
Device(config-call-home-profile)# active
no destination transport-method email
Example:
Device(config-call-home-profile)# no
destination transport-method email
exit
Example:
Device(config-call-home-profile)# exit
exit
Example:
Device(config-call-home)# exit
service call-home
Example:
Device(config)# service call-home
exit
Example:
Device(config)# exit
copy running-config startup-config
Example:
Device# copy running-config
startup-config
Configuring Smart Licensing
Purpose
By default, the CiscoTAC-1 profile is inactive.
To use this profile with the Call Home service,
you must enable the profile.
Enables the Call Home service via HTTP.
Connects to CSSM.
Enables the destination profile.
Disables the Call Home service via email.
Exits Call Home destination profile
configuration mode and returns to Call Home
configuration mode.
Exits Call Home configuration mode and
returns to global configuration mode.
Enables the Call Home feature.
Exits global configuration mode and returns
to privileged EXEC mode.
(Optional) Saves your entries in the
configuration file.