Keyless Entry; Keyless Entry Limitations; Keyless Entry Settings; Using Keyless Entry - Ford SUPER DUTY 2024 Owner's Manual

Hide thumbs Also See for SUPER DUTY 2024:
Table of Contents

Advertisement

KEYLESS ENTRY LIMITATIONS

Make sure your remote control is within 3 ft
(1 m) from the front door handles and the
tailgate.
The system could not function if:
The remote control remains stationary
for about a minute.
The vehicle battery has no charge.
The remote control battery has no
charge.
There is interference causing issues
with the remote control frequencies.
The remote control is too close to
metal objects or electronic devices, for
example keys or a cell phone.

KEYLESS ENTRY SETTINGS

Reprogramming the Unlocking
Function
You can enable the two-stage unlocking
function allowing you to unlock only the
driver door when you touch the unlock
sensor.
Press and hold both the lock and unlock
buttons on the remote control for four
seconds to disable or enable two-stage
unlocking.
If you program the unlocking function so
that only the driver door unlocks, you can
unlock all of the other doors from inside
your vehicle using the power door lock
control. You can unlock individual doors
by pulling the interior door handles on
those doors.
2024 Super Duty (TFH) Canada/United States of America, enUSA, Edition date: 202307, DOM

Keyless Entry

81
(If Equipped)
Keyless Detection Alert
Displays a message in the instrument
cluster if no valid key is detected, when you
exit your vehicle with a key, after the last
front door is closed and your keyless
vehicle is in run, indicating your vehicle is
still on. The horn sounds if you have driven
the vehicle and reached a speed of 16 mph
(25 km/h) and the above mentioned
conditions are met.
You can switch the audible alert on or off.
1.
From the settings menu, press Vehicle.
See Center Display (page 562).
2. Switch Key Detection Alert On or Off.

USING KEYLESS ENTRY

Unlocking the Doors
E333747
With your passive key within 3 ft (1 m) of
your vehicle, touch the unlock sensor on
the back of the door handle for a brief
period and then pull on the door handle to
unlock, being careful not to touch the lock
sensor at the same time or pull on the door
handle too quickly. The intelligent access
system requires a brief delay to
authenticate your passive key.
Locking the Doors
E333746
(If Equipped)

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents