Ford SUPER DUTY 2024 Owner's Manual page 461

Hide thumbs Also See for SUPER DUTY 2024:
Table of Contents

Advertisement

If you disconnect or replace the battery
and your vehicle has an automatic
transmission, it must relearn its adaptive
strategy. Because of this, the transmission
may shift firmly when first driven. This is
normal operation while the transmission
fully updates its operation to optimum
shift feel.
Removing the Battery
1.
Apply the parking brake and switch the
ignition off.
2. Switch all electrical equipment off, for
example lights and radio.
3. Wait a minimum of two minutes before
disconnecting the battery.
Note: The engine management system has
a power hold function and remains powered
for a period of time after you switch the
ignition off. This is to allow diagnostic and
adaptive tables to be stored. Disconnecting
the battery without waiting can cause
damage not covered by the vehicle
Warranty.
4. Disconnect and isolate the negative
battery cable terminal.
5. Disconnect and isolate the positive
battery cable terminal.
6. Remove the battery securing clamp.
7.
Remove the battery.
If you disconnect or replace the vehicle
battery, you must reset the following
features:
Window bounce-back. See Window
Bounce-Back (page 126).
Clock Settings.
Pre-set radio stations.
Replacing the Battery
Note: Before reconnecting the battery,
make sure the ignition remains switched off.
2024 Super Duty (TFH) Canada/United States of America, enUSA, Edition date: 202307, DOM
Maintenance
You must replace the battery with one of
exactly the same specification.
To install, reverse the removal procedure.
Note: Make sure that you correctly install
the battery terminal covers, battery cover
and battery cable terminals.
RESETTING THE BATTERY
SENSOR
When you install a new battery, reset the
battery sensor by doing the following:
1.
Switch the ignition on, and leave the
engine off.
Note: Complete Steps 2 and 3 within 10
seconds.
2. Flash the high beam headlamps five
times, ending with the high beams off.
3. Press and release the brake pedal three
times.
The battery warning lamp flashes three
times to confirm that the reset is
successful.
RECYCLING AND DISPOSING OF
THE 12V BATTERY
E107998
Seek advice from your local authority
about recycling old batteries.
457
Make sure that you dispose of
old batteries in an
environmentally friendly way.

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents