Power Running Boards; Power Running Board Precautions; Power Running Board Settings - Ford SUPER DUTY 2024 Owner's Manual

Power Running Boards

POWER RUNNING BOARD
PRECAUTIONS
WARNING: In extreme climates,
excessive ice buildup may occur, causing
the running boards not to deploy. Make
sure that the running boards have
deployed, and have finished moving
before attempting to step on them. The
running boards will resume normal
function once the blockage is cleared.
WARNING: Switch off the running
boards before jacking or placing any
object under your vehicle. Never place
your hand between the extended running
board and your vehicle. A moving running
board may cause injury.
Do not use the running boards, front and
rear hinge assemblies, running board
motors, or the running board underbody
mounts to lift your vehicle when jacking.
Use proper jacking points.
The running boards could move slower in
cold temperatures.
POWER RUNNING BOARD
SETTINGS
1. Press Features on the touchscreen.
2. Press Power Running Board.
3. Press SETTINGS.
Power Boards Modes
Note: When the vehicle speed is more than
3 mph (5 km/h), the option to select the
modes disables, to avoid unintended
operation.
2024 Super Duty (TFH) Canada/United States of America, enUSA, Edition date: 202307, DOM
(If Equipped)
Note: The power running boards reverse
direction and move to the end of travel if
they encounter an object when moving.
Keep the power running boards and
brackets clean for optimum performance.
Off
The power running boards remain stowed,
regardless of door position.
Auto
The power running boards deploy when
you approach your vehicle with a remote
control, unlock the door or open the door.
The power running boards stow:
• After a few seconds when you close
the doors.
• Instantly after you close and lock the
doors.
• If you unlock the door but do not open
it, after the timeout.
• If you have switched approach
detection on and do not open a door
before the auto timer setting expires.
• When the vehicle speed is more than
3 mph (5 km/h).
Note: When you select this mode, an option
displays that allows you to select how long
the running boards stay deployed without
opening the door.
Out
The power running boards remain
deployed, regardless of door position. The
power running boards stow when the
vehicle speed is more than 5 km/h, and the
mode changes to auto. You need to select
Out mode again if you want the power
running boards to stay deployed at the end
of each trip.
104