Automatic High Beam Control - Troubleshooting - Ford SUPER DUTY 2024 Owner's Manual

• The system detects severe rain, snow
or fog.
• The system detects street lighting.
• The camera has reduced visibility.
• The vehicle speed falls below
approximately 19 mph (30 km/h).
Note: The deactivation speed may be lower
on curves.
SWITCHING AUTOMATIC HIGH
BEAM CONTROL ON AND OFF
1. Using the instrument cluster controls
on the steering wheel, select Settings.
2. Select Vehicle.
3. Select Lighting.
4. Switch Auto High Beam on or off.
AUTOMATIC HIGH BEAM
CONTROL INDICATORS
Illuminates to confirm when the
system is ready to assist.
E146105
AUTOMATIC HIGH BEAM CONTROL – TROUBLESHOOTING
EQUIPPED)
AUTOMATIC HIGH BEAM CONTROL – INFORMATION MESSAGES
Message
Front Camera Low Visib-
ility Clean Screen
Front Camera Tempor-
arily Not Available
Front Camera Malfunc-
tion Service Required
2024 Super Duty (TFH) Canada/United States of America, enUSA, Edition date: 202307, DOM
Exterior Lighting
OVERRIDING AUTOMATIC HIGH
BEAM CONTROL
Push the lever away from you to switch
the high beams on.
Push the lever away from you again to
switch the high beams off.
Push the lever away from you for a third
time to switch automatic high beam
control back on.
The camera has reduced visibility. Clean the windshield. If
the message continues to appear, have your vehicle checked
as soon as possible.
The camera has malfunctioned. Wait a short period of time
for the camera to cool down. If the message continues to
appear, have your vehicle checked as soon as possible.
The camera has malfunctioned. Have your vehicle checked
as soon as possible.
121
E308790
Details
(IF