Checking The Wiper Blades; Replacing The Front Wiper Blades - Ford SUPER DUTY 2024 Owner's Manual

Use the rotary control to set the rain sensor
sensitivity.
Note: Use intermittent wipe positions to
adjust the rain sensor sensitivity.
When you select low sensitivity, the wipers
operate when the sensor detects a large
amount of water on the windshield.
When you select high sensitivity, the wipers
operate when the sensor detects a small
amount of water on the windshield.
CHECKING THE WIPER
BLADES
E142463
Run the tip of your fingers over the edge of
the blade to check for roughness.
REPLACING THE FRONT
WIPER BLADES
Make sure your vehicle is off before
beginning this procedure.
2024 Super Duty (TFH) Canada/United States of America, enUSA, Edition date: 202307, DOM
Wipers and Washers
E165804
1.
Note: Do not hold the wiper blade to lift the
wiper arm.
E345993
2. Press the wiper blade locking clip.
3. Remove the wiper blade.
Note: Make sure that the wiper arm does
not spring back against the glass when the
wiper blade is not attached.
4. To install, reverse the removal
Note: Make sure that the wiper blade locks
into place.
111
Pull the wiper blade and arm away
from the glass.
procedure.