Ford Super Duty 2008 Quick Reference Manual

Audiophile in-dAsh six Cd/Mp3/sAtellite CoMpAtible sound systeM Audiophile in-dAsh six Cd/Mp3/sAtellite CoMpAtible sound systeM
(if equipped)
Tire Pressure Fuses your Owner's Guide for detailed Use extreme caution when using
Your tire pressure needs to be If your electrical components are not information on tire changing tools
any device or feature that may take
properly set according to the working properly, a fuse may have and tire changing instructions.
your attention off the road. Your
recommended specifications. blown. Please refer to your
primary responsibility is the safe
These specifications can be Owner's Guide for fuse locations.
found on the Safety Compliance Fuel PumP shuT-OFF swiTch rOadside emergencies operation of the vehicle. Only use
Certification Label or Tire Label This device stops the electric fuel During your vehicle's limited non-essential features and devices
which is located on the B-Pillar or pump from sending fuel to the warranty period, the assurance
when it is safe to do so.
the edge of the driver's door. Please engine when your vehicle has had a and support of a 24-hour
check your tire pressure during substantial jolt. After an accident, if emergency roadside assistance
1. seTTing memOry PreseTs
routine maintenance and seasonal the engine cranks but doesn't start, program is included. Roadside
changes and when the Tire Pressure the switch may have been activated. assistance includes such services
To set a station: Select a frequency
Monitoring System warning indicator The fuel pump shut-off switch is as fuel delivery, tire changes, jump
band with the AM/FM button, then
is illuminated. Tire pressure is located on the passenger side of the starts, winch-outs, towing (limited
select a station. Press and hold a
specified to provide the appropriate instrument panel. You have to open distance) and lock-out assistance.
load capacity for your vehicle's axle the passenger side door and remove Complete your roadside assistance numbered preset button until the
load ratings. Keeping the tires at the the access panel to reset the switch. identification card and keep it handy sound returns.
proper pressure is an important part For switch reset instructions, please (such as in your wallet) for quick
of maintaining your vehicle. refer to your Owner's Guide. reference. This identification card
2. TexT/scan FuncTiOn
Improperly inflated tires can affect is located in either your Owner
Press and hold for a brief sampling
vehicle handling and can fail lOcaTiOn OF sPare Tire and Guide portfolio in the glove
suddenly, resulting in a possible loss TOOls/changing The Tires compartment (U.S.) or the Customer
of radio stations or CD tracks. Press
of vehicle control. Your vehicle's jack, lug wrench and Information Guide in the glove
again to stop. In CD/MP3 mode,
lug wrench extension (if equipped) compartment (Canada).
press and release to display track
are installed in your vehicle in
different locations based on cab title, artist name, disc title and file
configuration. Please refer to name (if available).
3. am/Fm and cd selecT
In radio mode, press AM/FM to
This Quick Reference Guide is not intended to replace your vehicle Owner's Guide which contains more
detailed information concerning the features of your vehicle, as well as important safety warnings designed to
select AM, FM1 or FM2 frequency
help reduce the risk of injury to you and your occupants. Please read your entire Owner's Guide carefully as
bands. Press CD to begin CD play.
you begin learning about your new vehicle and refer to the appropriate chapters when questions arise.
In CD mode, press AM/FM to stop
All information contained in this Quick Reference Guide was accurate at the time of duplication. We reserve CD play and begin radio play.
the right to change features, operation and/or functionality of any vehicle specification at any time. Your Ford
dealer is the best source for the most current information. For detailed operating and safety information,
4. On/OFF/VOlume cOnTrOl
please consult your Owner's Guide.
Press to turn ON or OFF. Turn to increase
or decrease volume.
Ford Motor Company Customer Relationship Center
P.O. Box 6248 | Dearborn, MI 48121
1-800-392-3673 (FORD) 5. lOading cds
(TDD for the hearing impaired: 1-800-232-5952)
Press the LOAD button and then a
preset number to load a CD. Press
June 2007
8 C 3 J 1 9 G 21 7 CA
and hold LOAD to autoload up to
Third Printing
6 CDs.
*8C3J_19G217_CA* Quick Reference Guide
Super Duty
Litho in U.S.A.
6. ejecTing cds Satellite radio is available only with
Press to eject a CD. For the a valid SIRIUS radio subscription.
In-dash Six CD/MP3 system, press Check with your authorized dealer
and hold to auto-eject all CDs for availability. 5 6
present in the system.
SPEED SENSITIVE VOLUME
7. seeK FuncTiOn (if equipped): The volume
Press to access the next listenable automatically changes slightly with
station or CD track. vehicle speed to compensate for
road and wind noise. Press MENU to
8. muTe reach settings. Use SEEK to adjust.
Pressing the button will mute
SETTING THE CLOCK: Press MENU
the playing media. Pressing it again
until SELECT HOUR or SELECT MINS
3
will return to the playing media.
is displayed. Press up/down arrows,
SEEK to adjust the hours/minutes.
9. Tune/disc selecTOr 4
Press to go up or down the radio
11. aux
frequency or to select a desired disc. 3
SATELLITE RADIO FEATURES AND
Also, use in menu mode to select
CONTROLS (if equipped): Press to
various settings.
2
cycle through FES/DVD (if equipped),
SAT1, SAT2, SAT3 (satellite mode if 1
10. menu
equipped) or LINE IN (auxiliary mode
CATEGORY: (satellite radio if
if equipped).
equipped – early availability):
Press MENU until the current active
12. shuFFle FuncTiOn A
category appears in the display Plays tracks in random order.
(CATEGORY MODE). In CATEGORY B
MODE, press / to scroll through
13. FOlders
the list of available Sirius channel Press to access previous or next
Categories. Press SEEK or SCAN to folder on MP3 discs, if folders C
select the Category.
are available.
SATELLITE RADIO MENU:
If your vehicle is equipped with a
(if equipped – late availability):
different radio, refer to your Owner's
Press MENU when satellite radio
Guide. If your vehicle is equipped
mode is active to access. Press
with a navigation system, please
OK to enter into the satellite radio
D E F
refer to the navigation supplement.
menu. Press / to cycle through
the following options: Category, Save
Song, Delete Song, Delete All Songs,
Enable Alerts/Disable Alerts.
duAl AutoMAtiC teMpeRAtuRe ContRol (dAtC) systeM duAl AutoMAtiC teMpeRAtuRe ContRol (dAtC) systeM
WITH HEATED SEATS AND HEATED MIRRORS (if equipped)
a. auTO in AUTO, (defrost) and
To engage automatic temperature (floor/defrost).
control, press AUTO and select
7 8 9
the desired temperature using the h. recirculaTiOn cOnTrOl
temperature control. The system will Recirculates air in the cabin, thereby
automatically determine fan speed, reducing the amount of time needed
airflow location, A/C on or off, and to cool down the interior of the
outside or recirculated air to heat or vehicle when used with A/C.
cool the vehicle, allowing it to reach
the desired temperature. i. dual: (single/dual electric
temperature control)
b. driVer/Passenger Allows the driver to have full control
TemPeraTure cOnTrOl of the cabin temperature settings
Press to Increase or decrease the (single zone) or allows the
10
temperature in the vehicle. passenger to have control of their
individual temperature settings
c. exT (dual zone control). Press to turn
11
Press to display outside on dual zone mode, press again to
12
temperature. Press again to return to single zone.
display cabin temperature settings.
j. heaTed mirrOrs
13
d. Fan sPeed cOnTrOl Press to defrost the outside rear
Press to Increase or decrease view mirrors. The heated mirrors
the fan speed. will turn off after 10 minutes or can
K
be shut off by pressing the button
B e. heaTed seaT cOnTrOls again. Please refer to Power Mirrors
Press to turn the heated seats on in the Driver Controls chapter of your
J
and off. The heated seats turn off Owner's Guide for more information.
when the ignition is turned off.
K. deFrOsT
F. manual OVerride cOnTrOl Use to clear ice or fog from the
Allows you to manually select where windshield by distributing air through
airflow is directed. To return to full the windshield defroster and
automatic control, press AUTO. demister vents.
G H E I
g. a/c cOnTrOl max a/c OPeraTiOn
Press to activate/deactivate air Automatic Operation: Press AUTO
conditioning. Use with recirculated for full automatic operation. Do not
air to improve cooling performance override A/C or recirculated air.
and efficiency. Engages automatically Set the temperature to 60˚F (16˚C).
Override Operation: Select air memOry seaTs/mirrOrs/adjusTable Pedals (if equipped)
This system allows automatic positioning of the driver seat, power mirrors, and adjustable pedals in
distribution. Select A/C and
two programmable positions. The memory seat control is located on the driver's door trim panel.
recirculated air. Use recirculated air
To program position 1, move the driver seat, mirrors and pedals (if equipped) to the desired
with A/C to provide colder airflow.
position using the associated controls. Press the SET control. The SET control indicator light will briefly
Set temperature to 60˚F (16˚C). Set
illuminate. While the light is illuminated, press control 1. Repeat this procedure to program position 2.
to highest front fan speed initially, The vehicle must be stationary (in Park or Neutral) to recall a position setting.
then adjust to maintain comfort.
TailgaTe sTeP (if equipped)
Your vehicle may be equipped with a feature that allows easy entry into the truck
bed. To use the tailgate step, open the tailgate. Pull the yellow latch lever to the
raPid heaT Tm suPPlemenTal
unlock position to release the grab handle from its stowed position and raise the
inTeriOr heaTer (if equipped)
handle upright until you feel it latch and see the latch lever in the lock position.
The yellow lever only needs to be used when releasing the grab handle. Rotate the
If your vehicle is equipped with a
center molding to unlatch the tailgate step. Pull the tailgate step out and down. Flip
diesel engine, it may be equipped
open the panel to widen the step. Always use the grab handle when stepping up or down on the tailgate step. Keep the
with a supplemental heater to assist step load (you + load) below 350 lbs. (159 kg).
in heating the inside of your vehicle
To close the tailgate step, fold the step panel, then lift and fully slide the tailgate step into the tailgate. Pull up on the
in cold weather. When you start your yellow latch lever at the bottom of the handle, then lower the handle. Never drive with the step deployed. Fully close
and latch the tailgate step before moving the vehicle.
vehicle and turn the climate control
on and the engine coolant bed exTender (if equipped)
Your vehicle may be equipped with a cargo
temperature is below a preset level,
management feature in the pick-up box. To open the bed extender
the supplemental heater will
into tailgate mode, pull the locking pin toward the driver's
automatically activate to aid the side of the vehicle. Rotate the storage hinge rearward
to unlatch the panels and then rotate the panels
climate control system in heating
toward the tailgate. Repeat for the other side of
your vehicle more quickly.
the bed extender. Finally, connect the two panels,
then rotate both knobs a quarter turn clockwise
The supplemental heater is most
to secure them. Ensure the latch rod is inserted
effective when using a mid to lower into the tailgate hole and the locking pins on
fan speed setting. both sides are engaged into their holes in the
pick-up box. Please refer to your Owner's
Guide for complete details on this feature.
For complete details on these and
other climate control features or
reVerse camera sysTem (if equipped)
if your vehicle is equipped with a The reverse camera system provides a video image of the
area behind the vehicle. The reverse camera system will
climate control system other than
automatically provide an image in the rear view mirror, when
the one shown, please refer to your
the transmission is placed in reverse. This image will
continue to be displayed on the mirror for a few seconds,
Owner's Guide.
once the transmission has been shifted out of reverse.
The camera lens for the reverse camera system is located on the tailgate,
near the tailgate handle. Keep the lens clean so the video image remains clear
and undistorted. Clean the lens with a soft, lint-free cloth and non-abrasive
cleaner. If the reverse camera system image is not clear or seems distorted
it may be covered with water droplets, snow, mud or any other substance. If this
occurs, clean the camera lens before using the reverse camera system.
The reverse camera system is not a replacement for the rear view and side view mirrors. Always make sure there are
no people or objects behind the vehicle before using reverse. For complete details on the reverse camera system,
please consult your Owner's Guide.