S
UPERSERVER 6023P-8R/6023P-8 User's Manual
5-9
Jumper Settings
Explanation of
Jumpers
To modify the operation of the
motherboard, jumpers can be
used
to
optional settings.
create shorts between two pins
to change the function of the
connector. Pin 1 is identified
with a square solder pad on
the printed circuit board. See
the motherboard layout page
for jumper locations.
No te : On two pin jumpers,
"Closed" means the jumper is
on and "Open" means the
jumper is off the pins.
CMOS Clear
JBT1 is not literally a jumper but
consists of two contact pads.
clear the contents of CMOS, short
these pads together by touching
them both with a metal conductor
such as the head of a small
screwdriver.
supplies, you must completely shut
down the system and remove the
AC power cord before clearing
CMOS.
choose
between
Jumpers
To
For ATX power
Connector
Pins
Jumper
Cap
Setting
5-18
3
2
1
3
2
1
Pin 1-2 short